Do you want to program your Chamberlain garage opener? It can be daunting to program all of the garage door opener devices. This blog post will explain how to program remote controls, keypads, and door controls for Chamberlain garage door openers.

Chamberlain Garage Door Openers with a Yellow Learn Button

Follow the PROGRAM ALL programming instructions if your garage door opener remote was programmed differently.

Click the yellow LEARN BUTTON to program it. Follow below given instructions:

1. Close the garage door.

2. Now press and release the yellow LEARN button. The Learn LED will blink for 30 seconds.

3. Hold the button down on the remote.

4. When the garage door opener lights up, press the button. You will hear it in two clicks or one blink.

5. You can test by pressing the button that you have just programmed. The door will open.

All the Door Openers for the Garage

1. Hold the programming button clipped to the sun visor until the LED at the front of your remote control turns on.

2. Press and release the button depending on the garage door opener type.

NOTE Ensure that the LED does not flash each time you press this button

Programming with the Smart Control Panel

1. Press the MENU button on the Smart Control Panel.

2. Scroll to PROGRAM (Schedule) using the arrow buttons. Click the Next Screen button.

3. Scroll down to “REMOTE” for more information.

4. Hold the button down until the Chamberlain garage door opener lights flash or you hear two clicks. Release the button. The programming is complete. You can test the program by pressing the button on your remote control. The door will open.

Programming with the door control multifunction and door control with motion detector

1. Double-press the LEARN button on the door handle.

2. Hold the button down until the garage door opener lights flash or you hear two clicks. Release the button. This completes the programming.

3. You can test the button by pressing it. The door will open.

Programming with the garage door opener

1. Garage door opener. The Learn LED will then turn on.

2. Hold the button down until the garage door opener lights flash or you hear two clicks. Release the button. The programming is complete.

3. You can test the program by pressing the button. The Garage door will now activate.

Programming with the push button control at the door

1. Hold the light button down and push the button until the LED flashes.

2. Hold the remote button until the garage door opener lights flash or click. Release the button. This completes the programming.

3. You can test the button by pressing it. The Chamberlain door will open.