Magnavox Universal Remote Codes For Vizio TV

Magnavox universal remote controls come with three different ways to program them to your Vizio TV. You can program your Magnavox remote control using below three different methods for programming with your Vizio smart tv.

Magnavox universal remote control by using auto setup

You can follow the auto-setup method for programming the Magnavox Universal Remote Control to your Vizio tv. Here are the steps.

1. Point your Magnavox Remote to the Vizio TV.
2. After that, you need to hold the Code Search Button on the Magnavox Universal Remote for 3 to 5 seconds.
3.  Make sure, the LED light up on the remote. After that, release remote button.
4. After that, you need press the TV button on your remote.
5. Point the remote towards the TV and press the power button on the remote .
6. Hold the power button until the indicator blinks.
7. Now, you need to press on the power off button to turn off your TV.
8. After that, you need to press the Enter button  for 5 seconds while the TV is off.
9. The settings are saved to the remote.
10. Then, turn on the TV with the remote to see if it works. If so, then your remote and TV have been successfully paired.

Magnavox universal remote control Setup by using Manual Method

You can try the manual method if your auto scan method did not work, or if you were unable to pair the remote.

1. Switch on your Vizo TV
2. Press the Code Search button on the Magnavox Universal Remote Control.
3. You need hold the Code Search button for 5 seconds to light up the LED indicator.
4. Press the TV button on the Magnavox universal Remote Control for programming with Vizio Smart TV.
5. Press the power button on your remote and point it at the TV.
6. Continue pressing the power button to send different infrared signal to your TV.
7. Press the Enter button as soon as your TV starts to respond and shuts itself off.
8. Press the Enter button for 5 seconds.
9. The code set on the remote will allow you to perform basic functions like input, audio up or down, channel up or down and the power button.
10. The remote is programmed correctly if all functions work perfectly.

How to Setup Magnavox universal remote control to Vizio TV with remote codes 

You can try this method if the two above methods did not work for you. This last method requires you to enter a code. This is how to program the universal remote.

1. Make sure your TV is plugged in, and that it’s turn on.
2. Find the 4-digit code of your vizio TV brand in the list below.
3. Press the Code Search Button to find the code on your Magnavox universal remote control.
4. Press the button for 3 to 4 seconds. Check that the remote’s lights are on.
5. Enter the four-digit code of your Vizio TV using the numeric keypad on your Magnavox universal Remote Control.
6. The LED indicator will blink five times if the code you entered does not match the TV.
7. Magnavox universal remote controls are paired with the vizio TV once you enter the correct code.

Magnavox universal remote codes for Vizio TV

Here is a list of codes for the Magnavox universal control that you can use to program your Vizio TV.